How to update BIOS when the Windows operating system doesn't start
BIOS is a basic induction system that is responsible for launching and building a computer. Updating BIOS may be necessary to correct errors, add new functions or enhance compatibility with equipment. However, sometimes updating BIOS may cause problems, especially if the Windows operating system is not launched.
When Windows is not launched, the updating of BIOS may appear to be a challenge, as the updating process is usually conducted through a special utilitator operating at the operational system level. However, there are ways to update BIOS that can be used when Windows is not launched.
One such way is to use the casing program to update BIOS directly from BIOS. This may require the creation of a load flash drive or a disk with a swallow that will need to be started when the computer is downloaded. It is important to note that the process of updating BIOS may be risky and, in some cases, lead to the malfunctioning of the computer or even damage to the processor, it is therefore recommended that the instructions be consulted before updating BIOS and that a corresponding backup copy of the data be made available.
Why do you need to update BIOS?
BIOS may need to be updated for several reasons:
New opportunities and functions: BIOS could add new computer functions and capabilities, such as support for new processors, improved nutrition management or support for new technologies.
Improving stability and productivity: BIOS updates can correct the errors and shortcomings of previous versions, which can lead to better stability and productivity of the system.
Security: BIOS updates can correct the security vulnerability associated with previous versions. This is particularly important in the light of new threats and harmful software.
Compatibility with new hardware: If you establish new hardware, such as processor, video card or hard drive, BIOS updates may be necessary to ensure its compatibility and proper functioning.
Updating BIOS may be a complex process, it is therefore recommended that the manufacturer ' s instructions be consulted before being implemented and that it be cautious to avoid possible problems or damage to the computer.
Incorrect equipment
If your computer or laptop works incorrectly, it could be linked to an outdated BIOS. There are several indications of the incorrect operation of equipment that may indicate the need to update BIOS:
1. System deceleration: If your computer is slower than usual, it may be related to the compatibility of the equipment and the established operating system. BIOS updates can rectify these problems and increase the productivity of your computer.
2. Unemployed or incorrect working devices: If some devices, such as keyboards, mouses or audible maps, do not work or work incorrectly, this may be related to the compatibility of equipment and the installed LO. BIOS updates can rectify these problems and return the work to the devices.
3. Periodical failures and reloading: If your computer is switched off from time to time, rebooted or issued a blue death screen, it may be caused by problems of compatibility between the equipment and the LO. BIOS updates can address these challenges and ensure a stable system.
4. Incorrect graphics: If artifacts, strange strips or colour distortions appear on the screen, this may be related to the compatibility of the graphical map and LO. BIOS updates can rectify these problems and ensure that graphics are properly displayed.
If you have problems as described above, the BIOS update may be a solution. But before BIOS is updated, make sure that the manufacturer ' s instructions are followed and do so carefully to avoid computer damage.
Vulnerability and rectification
Computer and maternity manufacturers regularly issue Vulnerability Adjustments to BIOS. These corrections are contained in the BIOS updates, which can be downloaded from official producer websites.
Before updating the EPA, it must be ensured that the selected update contains a corrigendum for specific vulnerability. Installation instructions should also be consulted to avoid system errors and damages.
It is important to remember:
- Create a backup copy of the current BIOS before updating so that, in case of problems, the previous version can be restored.
- Make sure that the source from which you intend to download the update is the official website of the manufacturer to avoid the installation of harmful or unsuitable software.
- Before the installation of the BIOS update, close all the programs that have been launched and preserve all the work that has not been completed to avoid the loss of data.
- Follow the manufacturer ' s instructions on the installation of the BIOS update, as they may differ according to the model and the manufacturer of the computer or the parent fee.
- Don't turn off the computer and don't reboot it during the installation of the BIOS update, as this may cause irreparable damage to the system.
Updating the EIS is not a challenge for inexperienced users, so if you are not certain of your skills, it is recommended that a specialist be consulted.
How do you prepare for the BIOS update?
Prior to updating the BIOS computer, several important steps must be taken to prepare:
- Make a backup of important data.
BIOS may be a risky process that may result in data loss or even damage to the system. It is therefore recommended that a backup copy of all important data on your computer be created before the BIOS update.
- Find out the current BIOS version.
Before you update the BIOS, you should know the current version of your computer BIOS. This will allow you to check whether the update is necessary and compare the current version to the new version of the BIOS you're going to establish.
- Check BIOS update requirements
Before updating the BIOS, draw attention to the requirements on the website of your computer manufacturer or your mother's fee. Usually, this includes checking the interoperability of updates with your operating system, verifying that there is enough battery charge or connection to the electrical grid.
- Load the necessary upgrade of BIOS
On the website of your computer manufacturer or your mother's fee, find a section of downloads or support. In this section, you can find the necessary upgrade of the BIOS for your specific device. Load the update file on your computer.
- Prepare the loading device
In some cases, the updating of BIOS requires the use of a loading device such as a flash drive or disk. Prepare such a device in advance and set up a loading device with a BIOS update file.
After these steps, you'll be ready to update the BIOS of your computer.
Completion of all programs launched
Before BIOS is updated, all computer-operated programs should be completed. This is important to avoid data loss and reduce the likelihood of errors in the updating process.
The Windows operating system manager is available to complete the programs. To call the manager, you can use the hot fist. Ctrl + Shift + Esc or Ctrl + Alt + Del and select the appropriate paragraph in the menu.
In the field manager ' s mission, go to Processes or Appendices. Then select all the programs launched and press the " Target " or " Closure " . Make sure you complete all the programs, including background processes, drives and system services.
Important: Pending completion of the programs, keep all open files and documents to avoid data loss.
Establishment of a standby copy of the current BIOS
A backup copy of the current version is recommended before updating BIOS. This will allow you to re-establish the previous version of BIOS in case of problems after renewal.
In order to create a backup BIOS, follow the instructions below:
| Step | Description |
|---|---|
| 1 | Reload the computer and press a certain keyboard (e.g. F2, F10 or Delete) to enter BIOS. |
| 2 | Carefully examine the instructions on the screen and find the option to create a backup BIOS. |
| 3 | Choose this option and follow the instructions on the screen to preserve the backup copy to the external reservoir, such as the USB-Flash Coper or the external hard drive. Be careful not to keep a backup copy on the same disc as the operating system. |
| 4 | Wait for the completion of the standby copy process. It could take some time depending on the size of your BIOS. |
Upon completion of the standby process, you will have a ready-to-use standby copy of your current BIOS. Keep this copy in a safe place because you might need it in the future.
Installation of necessary tools
In order to update the BIOS, it is necessary to put some tools on the computer first. These are some of them:
| 1. | Internet browser |
| 2. | USB copy or DVD |
| 3. | BIOS update file |
The first step is to believe that you have a functioning Internet browser to download the necessary files. You can use any popular browser like Google Chrome, Mozilla Firefox or Microsoft Edge.
Next, you're going to need a USB copycat or a DVD to record the BIOS update file. Make sure you have a USB-port on a DVD computer or disk drive to connect the reservoir or disk.
Finally, you have to download the BIOS update file from your mother's official production site. Usually, this file is presented in the format of .exe or .rom. Make sure you choose the right file for your specific model of maternal fees.
Once all the necessary tools have been installed, you're ready to move to the next step, to prepare a computer to update BIOS.