How to build a Router as a wifi PC adapter: detailed instruction
In today ' s world, where access to wireless Internet is becoming increasingly necessary, it is not always possible to establish wifi an adapter directly to the computer. In such cases, the Router could be used, building it as a wifi-adapter for the PK. This will allow the computer to be connected to a wireless network without the need to buy a separate adapter. The following is a detailed instruction that will help you build a Router as a wifi for the PK.
The first step in the development of the Router as a wifi adapter is to connect it to the computer via Ethernet cable. There is a need to put one end to the cable at the LAN port on the router, and the other at Ethernet port on your computer. Then turn on both devices.
The next step is the entrance to the Router. To this end, put the IP address of the Router in the address line of the browser and press Enter. Usually the IP address is marked on a sticker on the back of the Router. In the window, introduce the logic and passwords specified in the documentation to the router. This information may also be shown on the label. Press Enter's keyboard or Voighti's button to get into the trail.
Next, you need to find a section on the network or something like that on the router menu. In this section, you need to find the " Router Regime " or " Adapter Regime " and choose " wifi adapter " or " client " . Maybe you'll need a name and password for the wireless network you want to connect to.
How to build a Router as a wifi PC adapter
In some cases, it may be necessary to use the Router as a wifi computer adapter. This may be necessary, for example, if the computer does not have a built-in wifi module or has a problem with its work. The construction of the Router would then use it as a wireless adapter to connect the computer to the wifi network.
In order to develop the Router as a wifi for the PK, follow the instructions below:
- Connect the router to the computer with a network cab. Put one end of the cable at the port of LAN on the router and the other at the computer network port.
- Bring the IP address to the address line of any browser. Usually, the address is on the back of the Router or the documentation. Then press Enter.
- In the window open, enter your records to access the routers. If you don't know your records, check the records or consult the Internet service provider.
- In the menu of the Routers, find the wire network or the Wireless. It may be located under " Network development " or " Network building " .
- Activate the wireless mode of operation of the Router, selecting the appropriate op. It may be necessary to establish a network name (SSID) and a password for access.
- Turn on the computer the wifi function and find the wireless network with the name you mentioned in the previous step. Connect to this network using the previously indicated password.
- After a successful connection, you can use the Router as a wifi-upter for the PK. Now the computer will be connected to the internet via the router.
Please note that the design options for routers may vary according to model and manufacturer. If the instructions above are not suitable for your router, it is recommended that the documentation or support of the manufacturer be consulted to obtain more detailed information on the construction of the trawling as a wifi of the PC adapter.
Selection of a suitable router for use as wifi adapter
If you have a need to build a Router as a wifi for the PK, the selection of a suitable device plays an important role. The following are some factors that should be taken into account in the selection of the router.
- Binding standards: Make sure that the chosen router supports the standard you need without wire. The most popular standards are currently 802.11n and 802.11ac.
- Data transmission speed: Pay attention to the maximum rate of data transmission specified for the router. The faster your connection works.
- Dimensions: Make sure that the selected router has the necessary connections to the PC. Ethernet or USB are frequently used.
- Antennas: The availability of external rotary antenna can improve the strength and quality of the wifi signal. If you care about a good signal, pay attention to the routers with the outer antennas.
- Security: See if the Router supports the necessary safety protocols wifi, such as WPA2-PSK. Safe connection to the network is important to protect your personal information.
In addition to the above factors, please also draw attention to feedback from users on the selected route. Their experience and opinion can help you make the right choice.
| Model | Binding standards | Maximum data transmission speed | Divorces | Antenna | Security |
|---|---|---|---|---|---|
| TP-Link Archer C7 | 802.11ac | 1750 Mbit/sec | 4x Ethernet | 3 external antennas | WPA2-PSK |
| ASUS RT-AC68U | 802.11ac | 1900 Mbit/sec | 4x Ethernet, 1x USB | 3 external antennas | WPA2-PSK |
| Netgear Nighthawk X4S | 802.11ac | 2600 Mbit/sec | 4x Ethernet, 2x USB | 4 external antennas | WPA2-PSK |
The choice of a suitable router for use as wifi-adapter depends on your needs and preferences. Analyse the available options, compare the characteristics and select the ruin that best suits your demands.
Router insertion as wifi adapter to PK
Sometimes the computer needs to be connected to a wireless network, but the device is not equipped with a built-in wifi adapter. In this case, the Router may be used as a wifi adapter. This article will describe how to connect the router to the computer and build it as a wifi-adapter.
Step 1: Rooter connection to computer
First, it is necessary to properly connect the router to the computer. To this end, follow the instructions attached to your router. Typically, it is necessary to connect the router to the computer with a network cab, connecting it to the LAN port of the router and Ethernet to the computer port.
Step 2: Verification of the connection
Once the router is connected to the computer, the connection should be checked. Make sure the dew is on and the connection between the dew and the computer is fixed. To this end, it may be checked whether the indicator on the rotary indicates the connection.
Step 3: Router design as wifi adapter
Now that the connection is established, it is necessary to build a Router as wifi an adapter. To this end, follow the instructions attached to your router. In most cases, it is necessary to enter the router control panel, introduce login and passwords (usually default by login: "admin " , password: "admin " ) and establish the Router ' s operating regime as wifi adapter.
Step 4: Connection to wireless network
Once the Router is installed as wifi, the adapter can be connected to a wireless network. On the computer, open the list of available wifi networks and select the network you want to connect to. Introduce the password if it's required, and wait for the computer to connect to the network.
Conclusion
Connecting the Router as wifi adapter to the computer allows access to wireless networks even if the computer is not equipped with a built-in wifi adapter. The right connection and the construction of the Router will allow you to be easily and quickly connected to the wireless network and to enjoy the Internet without wires.
Router construction as wifi PC adapter
Step 1: Make sure you have a Router who supports the ability to work in the wifi-adapter mode.
Step 2: Connect your P.P. to the Router with Ethernet cable. Make sure you have access to the routers.
Step 3: Enter the Router Development Interface, introduce the IP address of the Router into the web browser. Usually the IP address is indicated on a device near Ethernet ports or in a router operating instruction. Introduce the user name and password for entry into the Router Buildings interface, if required.
Step 4: Find a section of the line related to the Router regime. Usually, this section is called Wi-Fi or Wireless.
Step 5: Incorporate the Router mode as wifi adapter. Usually, this option can be selected on the rolling list with the router modes.
Step 6: Set up the parameters of wifi adapter. You may need to indicate SSID (the name of the network) and the password so that other devices can connect to your PC via the router.
Step 7: Keep the change and reboot the router to apply the construction.
Step 8: Disconnect the Ethernet cable connecting the PC to the router. Now your PC can use the Rooter as a wifi-adapter to connect to wireless networks.
So you built your router as a wifi-adapter for your PC. Now your P.P. can connect to wireless networks through the router, expanding Internet connectivity.
Question-record
Why do I need to build a Router as a wifi-apper for the PK?
If your computer doesn't have a built-in Wi-Fi adapter, or if the existing adapter doesn't work properly, setting the trigger as a Wi-Fi adapter can be useful to connect to a wireless network.
How do you know if we can build a Router as a Wi-Fi Adapter?
Not all routers support the Wi-Fi Adapter function. In order to know if your manufacturer supports this function, you can read his documentation or seek technical support from the manufacturer.
How do you connect the router to the computer as Wi-Fi Adapter?
In order to connect the router to the computer as Wi-Fi Adapter, you need to take a few steps: first, turn on the Wi-Fi Adapter mode, then connect it to the computer with Ethernet cable, and finally set up the computer connection parameters.
What difference does it make between the use of the Router as Wi-Fi Adapter and the use of the usual Wi-Fi Adapter?
The main difference is that when using a router as a Wi-Fi adapter, you are able to connect several devices to a wireless network at the same time, as well as expand the Wi-Fi radius. However, the development of the Router as Wi-Fi Adapter may be difficult and require some additional action.