How to eliminate obs studio noise delay: useful advice

One of the most common problems with the use of the OBS Studio software for simming or video recording is the sound delay. The resulting delay between video and audio may cause confusion and impair the quality of content. However, there are several useful advices that will help address this issue and achieve synchronization of sound and video in OBS Studio.

First of all, we should check the OBS Studio. Go to the construction deposit, then select Audio. Make sure there's a right source of audio and the right frequency of discontinuation. Also, check that the microphone location is zero. If these structures do not fix the problem, you can try to build a microphone manually, by increasing or reducing its delay by a few milliseconds.

Secondly, if the problem of delaying sound occurs only when the image or video is recorded in a given program, attention should be drawn to the design of the audio program. Some programs have their own sound delay options that may differ from those in OBS Studio. Check out the audio designs in the program you're building or recording the video, and make sure they're synchronized with OBS Studio.

Finally, if none of the above-mentioned decisions help, the problem may be related to the iron characteristics of your computer. Check OBS Studio and compare them to your system. Audio devices may need to be updated or operational memory should be increased in order to eliminate sound delays.

Removing sound delay in OBS Studio: effective methods

One of the most common problems in the use of OBS Studio is the sound delay. This may be particularly unpleasant if you're playing games or online broadcasting, where sound accuracy is an important aspect.

There are, however, several effective methods that will help you eliminate the sound delay in OBS Studio:

1. Check the audio settings.: Make sure you choose the right device as a source of sound. Check the constructions in the OBS Studio deposit and make sure that the correct audio is chosen.
2. Update the sound drives.: Make sure you have the last version of the sound drives for your computer. Older drivers can delay sound.
3. Change the discontinuation frequency: In the OBS Studio structures, try to change the frequency of discontinuation of audio. Some users report that a lower frequency setting (e.g. 44.1 kHz) helps to eliminate sound delay.
4. Turn off the sound.: If you have any sound effects (e.g. reverberation or equateur), try to disable them. Some effects can delay sound.
5. Use the hardware acceleration: In the OBS Studio structures, you can turn on the hardware acceleration. It can help to remove the sound delay, especially if your computer has sufficient hardware.

If there is still a sound delay after these methods have been implemented, perhaps the problem may be related to your audio system or network. In this case, it is recommended that OBS Studio be consulted for further assistance.

Sources:

• https://obsproject.com/forum/threads/audio-delay-synching-suggestions-and-observations. 92785/#post-411783
• https://www.reddit.com/r/obs/comments/hk7o38/audio_and_video_out_of_sync/fwn2y7a/

Check the audio structures at OBS Studio.

One of the main reasons for delaying sound in OBS Studio may be related to wrong settings of audio. Here are some useful tips to check and build audio at OBS Studio:

1. Check the entry and exit devices: Make sure that the right devices for injecting and decommissioning sound in OBS Studio settings are chosen. Check that the devices you want to use to capture and remove the sound are properly and correctly connected to the computer.
2. Delaying sound: If a sound delay is still present, you can try to delay manually to synchronize audio and video. In the audio structures of OBS Studio, find the section " Delay " and try to regulate its meaning to achieve the best result.
3. Avoid the use of sound-processing effects: The use of sound-processing effects, such as noise or equateur, can delay sound. Try to disconnect these effects and see if the sound's delayed.
4. Update the sound drives: Make sure you have the latest versions of the divers for the sound card. Outdated or incompatible driveways may cause problems with sound delay.

In line with these councils, you can check and build audio at OBS Studio to eliminate the problem of late sound and provide better broadcasting or recording.

Update the sound drives.

If you have problems with the late sound at OBS Studio, one of the reasons might be an outdated sound drive.

Drivers are software that allows the operating system to interact with hardware, in this case with a sound map. The outdated drivers may cause various problems, including sound delay.

In order to update the players of the sound card, do the following actions:

1. Determine your sound card model. Usually, model information can be found on the map or in the documentation.
2. Visit the official sound card manufacturer's website. Use the search and find the section " Support " or " Drivers " .
3. Choose your sound card model and the operating system. Usually, the manufacturer offers a few versions of the divers for different operating systems.
4. Download the last version of the diver for your sound card.
5. Set up a downloaded driveway, following instructions on the screen. Usually, the installation is to launch a downloaded file and to steer the Daleye or " fix " button.
6. Upon completion of the installation, reload the computer so that the changes can enter into force.

After the retrofitting of the sound card, check OBS Studio's work. In most cases, this decision helps to remove the sound delay and improve the overall productivity of the program.

Use a low-delayed audio interface.

In case you fail to resolve the OBS Studio sound delay problem through the software, it is recommended to draw attention to your audio interface. Some interfaces have built-in hardware acceleration that can significantly reduce the delay.

Audiointerfeis (or audible plaque) is an apparatus that allows audio-data to be transmitted and recorded on your computer. Many built-in sound maps used on maternity charges can have a significant delay, especially in real-time audio-data processing.

In selecting audio interfaces for use with OBS Studio, please refer to the following parameters:

• Latency: Note the delay specified by the manufacturer. The less they matter, the better.
• Sampling (sample rate): High sound quality is usually achieved at higher values (e.g. 44.1 kHz or 48 kHz);
• Number of channels: Make sure the interface supports the number of channels you need.

Acquisition of low-delayed audio interfaces can significantly improve productivity and prevent a delay in operating with OBS Studio.

Manufacturer	Model	Price
Focusrite	Scarlett 2i2	$169.99
PreSonus	AudioBox USB 96	$99.95
Behringer	UMC22	$4.99

Note that these prices can change and serve only for market price orientation.